Toyota 4-Runner 1985 Repair Manual page 503

AUTOMATIC TRANSMISSION -
Assembly of Transmission
AT-101
30
Ai •
35
,~
SoiJ-ength (mm)
40. INSTALL BOLTS IN VALVE BODY
Install the bolts as shown.
NOTE: Each bolt length (mm) is indicated in the figure.
Torque: 100 kg-em (7 ft-Ib, 10 N·m)
41. INSTALL OIL STRAINER AND BOLTS
Install the small plate and oil strainer.
Torque: 55 kg-em (48 in.-Ib, 5.4 N om)
42. INSTALL DETENT SPRING
43. INSTALL OIL TUBES
Using a plastic hammer, install the tubes into the position
indicated in the photo.
CAUTION: Be careful not to bend or damage the tubes.
44. INSTALL MAGNETS IN PAN AND INSTALL OIL PAN WITH
NEW GASKET
(a) Install the magnets in the pan.
CAUTION: Make sure that the magnets do not interfere
with the oil tubes.