Toyota 4-Runner 1985 Repair Manual page 348

MANUAL TRANSMISSION - W46, 55 and 56 Transmission MT-17
n
WMOO61
WMOO62
\
\
WMOO63
WM0064
WM0065
2. CHECK OIL CLEARANCE OF FIRST GEAR
3.
4.
5.
Using a dial indicator, measure the oil clearance between
the gear and inner race with the needle roller bearing in-
stalled.
Standard clearance: 0.009 - 0.060 mm
(0.0004 - 0.0024 in.)
Maximum clearance: 0.15 mm (0.0059 in.)
CHECK OIL CLEARANCE OF SECOND AND COUNTER
FIFTH GEAR
Using a dial indicator measure the oil clearance between
the gear and output shaft with the needle roller bearing in-
stalled.
Standard clearance:
2nd gear
0.009 - 0.060 mm
(0.0004 - 0.0024 in.)
5th gear
0.009 - 0.062 mm
(0.0004 - 0.0024 in.)
Maximum clearance:
0.15 mm (0.0059 in.)
CHECK OIL CLEARANCE OF THIRD GEAR
Using a dial indicator, measure the oil clearance between
the gear and output shaft.
Standard clearance: 0.060 - 0.103 mm
(0.0024 - 0.0041 in.)
Maximum clearance:
0.20 mm (0.0079 in.)
INSPECT SYNCHRONIZER RINGS
(a) Turn the ring and push it in to check the braking action.
(b) Measure the clearance between the synchronizer ring
back and the gear spline end.
Standard clearance: 0.7 - 1.7 mm
(0.028 - 0.067 in.)
Minimum clearance: 0.5 mm (0.020 in.)