Toyota 4-Runner 1985 Repair Manual page 330

CL-10
Front
..
='---SST
~~~--SST
SST
CLUTCH - Clutch Unit
82020
Z2230
Z2231
CL0021 CL0022
CL0023
8. INSPECT RELEASE BEARING
Turn the bearing by hand while applying force in the rotn-
tion direction.
If bearing sticks or has much resistance, replace the release
bearing.
NOTE: The bearing is permanently lubricated and requires
no cleaning or lubrication.
9. IF NECESSARY, REPLACE RELEASE BEARING
(a) Using a press and SST, press the release bearing from
the hub.
SST 0931 5-00010
(b) Using a press and SST, press a new release bearing
into the hub.
SST 0931 5-00021
(c) After installing the bearing, check that there is no d
on the bearing when it is turned under pressure.
INSTALLATION OF CLUTCH UNIT
(See page CL-7)
1. INSTALL DISC ON FLYWHEEL
Using SST, install the disc on the flywheel.
SST 09301-20020
2. INSTALL CLUTCH COVER
(a) Align the marks on the clutch cover and flywheel.
(b) Tighten the bolts evenly. Make several passes around
the cover until it is snug. Torque the bolts.
Torque: 195 kg-em (14 ft-Ib, 19 N·m)