Toyota 4-Runner 1985 Repair Manual page 396

\
\
MANUAL TRANSMISSION - G 52 Transmission
MT-65
GM0012
GM0099
37. DISMOUNT INTERMEDIATE PLATE FROM VISE
(a) Dismount the intermediate plate from the vise.
(b) Remove the bolts, nuts, plate washers and gasket.
38. INSTALL TRANSMISSION CASE WITH NEW GASKET TO
INTERMEDIATE PLATE
Align each bearing outer race, each fork shaft end and
reverse idler gear shaft end with the case installation holes,
and install the case.
If necessary, tap on the case with a plastic hammer.
39. INSTALL TWO BEARING SNAP RINGS
40. INSTALL FRONT BEARING RETAINER WITH NEW GASKET
(a) Install the bearing retainer with a new gasket.
(b) Apply liquid sealer to the bolts.
(c) Install and torque the bolts.
Torque: 170 kg-em (12 ft-Ib, 17 N·m)