Toyota 4-Runner 1985 Repair Manual page 94

ENGINE MECHANICAL - Cylinder Block EM-65
14. INSTALL SHIFT LEVER FOR INSIDE OF VEHICLE (with MIT)
15. CONNECT BOND CABLES TO ENGINE REAR SIDE AND RH
SIDE
16. INSTALL COMPRESSOR TO BRACKET (with A/C)
(a) Install the compressor with four bolts.
(b) Install the drive belt and adjust the belt tension.
17. CONNECT BOND CABLE FOR VANE PUMP BRACKET
18. INSTALL VANE PUMP WITH VANE PUMP BRACKET
(with power steering)
Install the vane pump with four bolts.
19. CONNECT FOLLOWING PARTS:
(a) Distributor wire
(b) High-tension cord
(c) Alternator wires
(d) Ox sensor wire