Toyota 4-Runner 1985 Repair Manual page 319

/
;'
CHARGING SYSTEM - Alternator
CH-13
CH0219
CH0239
6. INSTALL BRUSH HOLDER WITH IC REGULATOR
(a) Install the brush holder with IC regulator.
(b) Install the two screws to IC regulator.
NOTE: Check the clearance between the brush holder and
connector as 1 mm or more.
(c) Install the three screws.
(d) Install the brush holder cover to the rear end frame.
7.
INSTALL REAR END COVER
(a) Install the end cover with the three nuts.
(b) Install the terminal insulator with the nut.
8.
MAKE SURE ROTOR ROTATES SMOOTHLY