Toyota 4-Runner 1985 Repair Manual page 395

MT-64
MANUAL TRANSMISSION - G 52 Transmission
GM0092
GM0093
GM0094
GM0095
33. CHECK INTERLOCK
(a) Shift fork shaft No.1 to the 1 st speed position.
(b) Fork shafts No.2, No.3, No.4 and No.5 should not
move.
34. INSTALL FIVE SLOTTED SPRING PINS
Using a pin punch and hammer, drive the slotted spring
pins into each shift fork, reverse shift arm and reverse shift
head.
35. INSTALL TWO FORK SHAFT E-RING
36. INSTALL LOCKING BALLS, SPRINGS AND SCREW PLUGS
(a) Apply liquid sealer to the plugs.
(b) Install the locking balls, springs and screw plugs and
torque the screw plugs with a torx socket wrench.
Torque: 190 kg-em (14 ft-Ib, 19 N·m)
NOTE: (5-Speed) Install the short spring into the botl
of the intermediate plate.