Toyota 4-Runner 1985 Repair Manual page 363

MT-32
MANUAL TRANSMISSION -
W46, 55 and 56 Transmission
i )
~
WM0149
WM0150
WM0151
WM0035
WM0152
23.-2 (5-Speed)
INSTALL SHIFT FORKS, SHIFT FORK SHAFTS AND
REVERSE IDLER GEAR
(a) Install the reverse idler gear and shaft.
(b) Install shift fork No.3, fork shaft No.3 and reverse
shift arm.
( 1 ) Coat the pin with MP grease and insert it into the
reverse shift head hole.
(2) Insert shift fork shaft No.3 through shift fork No.
3 and the reverse shift arm.
(3) Align shift fork No.3 with the hub sleeve No.
3 groove, put the reverse shift arm into the pivot
of bearing retainer and align the reverse shift arm
shoe with the reverse idler gear groove. Install
shift fork shaft No.3 to the intermediate plate.
(c) Install shift fork shaft No.4.
(1) Push the pin, which was inserted into the reverse
shift arm hole, into the groove of shift fork shaft
No.3.
(2) Install shift fork shaft No.4 to the intermediate
plate over the reverse shift arm.
(d) Using a pin punch, drive in the slotted spring pin until
it is flush with the fork.