Toyota 4-Runner 1985 Repair Manual page 401

MT-70 MANUAL TRANSMISSION - Installation of Transmission
MTOQ16 MT0015
MT0021
MT0020
(c) Install the engine rear mounting bracket to the sup-
port member. Torque the bolts.
Torque: 130 kg-em (9 ft-Ib, 13 N·m)
(d) Lower the transmission and rest it on the extension
housing.
(e) Install the bracket to the mounting. Torque the bolts.
Torque: 260 kg-cm (19 ft-Ib, 25 N·m)
4. REMOVE PIECE OF WOOD FROM FRONT
CROSSMEMBER
5. INSTALL EXHAUST PIPE, BRACKET AND PIPE
(a) Install the exhaust pipe to the manifold.
Torque: 400 kg-em (29 ft-Ib, 39 Nom)
(b) Install the pipe bracket to the clutch housing.
Torque: Upper 380 kg-em (27 ft-Ib, 37 Nom)
Lower 700 kg-em (51 ft-Ib, 69 Nom)
(c) Install the exhaust pipe clamp.
6. INSTALL STARTER LOWER MOUNTING BOLT AND
RELEASE CYLINDER TUBE BRACKET
Torque: 400 kg-em (29 ft-Ib, 39 Nom)
7 . INSTALL CLUTCH RELEASE CYLINDER
Torque: 120 kg-em (9 ft-Ib, 12 Nom)
8.
CONNECT SPEEDOMETER CABLE AND BACK-UP LIGHT
SWITCH
9. CONNECT PROPELLER SHAFT
(See page PR-2)