Toyota 4-Runner 1985 Repair Manual page 379

MT-48
111111
MANUAL TRANSMISSION - G 52 Transmission
GM0041
GM0042
GMOO45
GMOO46
GM0047
28. REMOVE FIFTH GEAR, REAR BEARING AND
FIRST GEAR ASSEMBLY
(a) Using two screwdrivers and a hammer, tap out ' .
snap ring.
(b) Using a press, remove the 5th gear, rear bearing, 1 st
gear and inner race.
(c) Remove the needle roller bearing.
(d) Remove the synchronizer ring.
29. REMOVE LOCKING BALL
Using a magnetic finger, remove the locking ball.
30. REMOVE HUB SLEEVE NO.1 ASSEMBLY AND
SECOND GEAR ASSEMBLY
(a) Using a press, remove hub sleeve No.1, the syn-
chronizer ring and 2nd gear.
(b) Remove the needle roller bearing.
31. REMOVE HUB SLEEVE NO.2 ASSEMBLY AND
THIRD GEAR ASSEMBLY
(a) Using snap ring pliers, remove the snap ring.