Toyota 4-Runner 1985 Repair Manual page 352

MANUAL TRANSMISSION - W46, 55 and 56 Transmission
MT-21
WM0084
WM0085
WM0086
WM0087
(b) Using a pin punch and hammer, drive out the slotted
spring pin.
(c) Pull off the lever housing and slide out the shaft.
(d) Install the lever housing.
(e) Using a pin punch and hammer, drive in the slotted
spring pin.
(f) Install and torque the screw plug.
Torque: 250 kg-em (18 ft-Ib, 25 N·m)
12. (S-Speed)
IF NECESSARY, REPLACE BEARING AND OUTER RACE
(a) Remove the outer race from the extension housing.
(1) Using two screwdrivers, remove the snap ring.
(2) Using SST, tap out the outer race.
SST 09608-35013
(b) Install the bearing outer race.
(1) Using SST, install a new outer race.
SST 09608-35013