Toyota 4-Runner 1985 Repair Manual page 77

EM-48 ENGINE MECHANICAL - Cylinder Block
12. DISCONNECT FOLLOWING WIRES:
(a) Cold start injection wire
(b) Throttle position sensor wire
(c) Air valve wire
13. REMOVE CHAMBER WITH THROTTLE BODY
14.
(a) Remove the two bolts holding the EGR valve to the
chamber.
(b) Disconnect the chamber from the stay.
(c) Remove the bolts and nuts holding the chamber to the
intake manifold.
(d) Remove the chamber with the throttle body.
DISCONNECT FOLLOWING WIRES:
(a)
Cold start injector time switch wire
(b)
Water thermo sensor wire
(c)
00 thermo switch wire (with AfT)
(d)
Injector wires
(e)
Thermo sensor wire
(f)
Vacuum switch wire
(9)
Oil pressure switch wire
(h)
Starter wire