Toyota 4-Runner 1985 Repair Manual page 350

MANUAL TRANSMISSION - W46, 55 and 56 Transmission MT-19
WM0071
WM0072
WMQQ73
8. INSPECT FRONT BEARING RETAINER
Check the retainer and oil seal for wear or damage. If the
oil seal is worn or damaged, replace it as follows.
(a) Using a screwdriver, pry out the oil seal.
(b) Using SST, press in the oil seal.
SST 09608-20011
Oil seal depth: 11.4 - 12.0 mm from retainer end
(O.449 -
0.472 in.)
9. IF NECESSARY, REPLACE COUNTER GEAR FRONT
BEARING AND SIDE RACE
(a) Using snap ring pliers, remove the snap ring.
(b) Using a press and SST, press out the bearing.
SST 09950-00020
(c) Check the side race for wear or damage.
(d) If necessary, remove the side race.
(1)
Using a SST and socket wrench, remove the side
race.
SST 09950-20015
(2) If the side race cannot be removed with SST,
grind part of the side race and cut it off with a
chisel.