Toyota 4-Runner 1985 Repair Manual page 66

10
4
2 5
~
8
6 3
ENGINE MECHANICAL - Cylinder Head
EM-37
7
9
EM0815
8. INSTALL FUEL PUMP TO CYLINDER HEAD
(a) Install the fuel pump with the two bolts.
Torque the bolts.
Torque: 220 kg-em (16 ft-Ib, 22 N-m)
(b) Connect the three fuel pipes.
9. INSTALL CHECK VALVE WITH AIR PIPE
(a) Install the check valve with the air pipe.
(b) Connect air hose No.3 to the EACV.
(c) Connect the air pipe to the exhaust manifold.
10. INSTALL HEAT INSULATER TO EXHAUST MANIFOLD
INSTALLATION OF CYLINDER HEAD
1. APPLY SEALER TO CYLINDER BLOCK
(See step 1 on page EM-26)
2. INSTALL CYLINDER HEAD
(See step 2 on page EM-27)
3. 'NSTALL ROCKER ARM ASSEMBLY
(See step 3 on page EM-27)
4. INSTALL CHAIN COVER BOLT
(See step 4 on page EM-27)
5.
INSTALL CAM SPROCKET ON CAMSHAFT
(See step 5 on page EM-27)
6. INSTALL DISTRIBUTOR DRIVE GEAR
(See step 6 on page EM-2a)
7. ADJUST VALVES CLEARANCE
(See step 7 on page EM-28)
8. INSTALL HEAD COVER
(See step a on page EM-29)