Toyota 4-Runner 1985 Repair Manual page 55

EM-26 ENGINE MECHANICAL -
Cylinder Head
2. INSTALL CAMSHAFT
(a) Place the camshaft in the cylinder head and install thp.
bearing caps in numbered order from the front
VI.
arrows pointing toward the front.
(b) Install and torque the cap bolts.
Torque: 200 kg-em (14 ft-Ib, 20 N·m)
3. INSTALL INTAKE MANIFOLD
(a) Position a new gasket on the cylinder head.
(b) Install the intake manifold with the delivery pipe and
injection nozzles.
(c) Install the six bolts, one hexagon bolt and two nuts.
Torque the bolts and nuts.
Torque: 195 kg-em (14 ft-Ib, 19 N·m)
4. INSTALL EGR VALVE WITH VACUUM MODULATOR
(a) Position a new gasket on the cylinder head.
(b) Apply a sealer to the upper right bolt.
(c) Place the EGR with vacuum modulator valve in
t~
installed position and tighten the two bolts on the in-
take manifold side of EGR pipe.
(cP
Install the vacuum hose to the top of the EGR valve.
5. INSTALL EXHAUST MANIFOLD
(a) Position a new gasket on the cylinder head.
(b) Install the exhaust manifold with eight nuts.
Torque the nuts.
Torque: 450 kg-em (33 ft-Ib, 44 N ·m)