AUTOMATIC TRANSMISSION - Component Groups (Valve Body)
AT-77
~v
~.
I,
Lower Valve Body Side
:'!' ..•..
fIO
. " :
• II • I.
.
:;fJ~
-.
--
.
,
21. INSTALL LOWER BODY COVER SET BOLTS
22.
IDENTIFY CHECK BALLS AND SPRING
Note the different size of the two rubber check balls. The
spring goes with the larger ball for damping.
23.
INSTALL CHECK BALL, DAMPING CHECK BALL, SPRING,
OIL COOLER BY -PASS VALVE AND SPRING
24. INSTALL LOWER VALVE BODY GASKET
Note that the two gaskets are not interchangeable. The
gasket must lay flat on the valve body.
CAUTION:
Make sure that new gasket matches the old
one.
25. INSTALL LOWER VALVE BODY PLATE
Set the plate into place. Temporarily install the two short
bolts finger tight to compress the plate against the spring-
loaded check valve .
NOTE:
Use the bolt for the oil strainer.