Toyota 4-Runner 1985 Repair Manual page 374

MANUAL TRANSMISSION - G 52 Transmission
MT-43
GM0015
GM0016
GMOQ17
GM0018
7.
MOUNT INTERMEDIATE PLATE IN VISE
(a) Use two clutch housing bolts, plate washers and suit-
able nuts as shown.
CAUTION:
Install the plate washers in reverse of normal.
Increase or decrease plate washers so that the bolt tip and
front tip surface of the nut are aligned.
(b) Mount the intermediate plate in a vise.
8. REMOVE STRAIGHT SCREW PLUGS, LOCKING BALLS
AND SPRINGS
(a) Using a torx socket wrench, remove the four plugs.
(b) Using a magnetic finger, remove the springs and balls.
9. REMOVE SLOTTED SPRING PINS
Using a pin punch and hammer, drive out the five pins.
10. REMOVE TWO E-RING