Toyota 4-Runner 1985 Repair Manual page 357

MT-26
MANUAL TRANSMISSION -
W46, 55 and 56 Transmission
WM0123
WM0125
8. MEASURE FIRST AND SECOND GEAR THRUST
CLEARANCE
Using a feeler gauge, measure the 1 st and 2nd gear thr
clearance.
Standard clearance: 0.10 - 0.25 mm
(0.0039 - 0.0098 in.)
Maximum clearance: 0.30 mm (0.0118 in.)
9. INSTALL OUTPUT SHAFT TO INTERMEDIATE
PLATE
(a) Before installing the output shaft, use SST to remove
the counter gear center bearing outer race.
SST 09608-35013
NOTE: Install the outer race after installing the counter
gear.
(b) Install the output shaft into the intermediate plate by
pulling on the output shaft and tapping on the inter-
mediate plate.
10. INSTALL INPUT SHAFT AND COUNTER GEAR
(a) Install the input shaft and counter gear together.
(b) Using SST, install the counter gear center bearing out-
er race.
SST 09316-60010
NOTE: Be careful not to damage the bearing rollers.