Toyota 4-Runner 1985 Repair Manual page 478

AT-76
Body Side
AUTOMATIC TRANSMISSION - Component Groups (Valve Body)
.t,
14. INSERT REGULATOR VALVE PLUNGER INTO SLEEVE
Insert with the rounded end first. Make sure that it is fuJI"
inserted: the plunger should be recessed inside the slee
15. INSERT SLEEVE WITH PLUNGER
16'. INSTALL REGULATOR VALVE SPRING RETAINER
17. INSTALL PRESSURE RELIEF BALL. SPRING AND RETAINER
18.
CHECK RETAINERS AND LOCATING PINS
Make sure that the retainers and pins are installed correctly.
19. INSTALL CHECK BALLS
20. INSTALL LOWER BODY COVER
Install in following order.
Gasket-plate-gasket-cover.
NOTE: The two gaskets are not interchangeable.