Toyota 4-Runner 1985 Repair Manual page 344

, )
MANUAL TRANSMISSION - W46, 55 and 56 Transmission MT-13
WM0041
WM0261
WM0044
10. (5-Speed)
MEASURE COUNTER FIFTH GEAR THRUST
CLEARANCE
Using a feeler gauge, measure the counter 5th gear thrust
clearance.
Standard clearance: 0.10 - 0.41 mm
(0.0039 - 0.0161 in.)
Maximum clearance: 0.46 mm (0.0181 in.)
11. (5-Speed)
REMOVE COUNTER REAR BEARING, SPACER, COUNTER
FIFTH GEAR AND NEEDLE ROLLER BEARING
(a) Using snap ring pliers, remove the snap ring.
(b) Using SST, remove the rear bearing, spacer, 5th gear
and bearing.
SST 09213-36020
CAUTION: Be careful not to catch the output shaft rear
bearing roller on the counter 5th gear.
(c) Remove the spacer.
12.
(5-Speed)
REMOVE HUB SLEEVE NO.3 ASSEMBLY
(a) Using two screwdrivers and a hammer, tap out the
snap ring.
(b) Using SST, remove clutch hub No.3.
SST 09950-20015
CAUTION: Latch the claw of the SST onto the clutch hub,
not the shifting key retainer.