Toyota 4-Runner 1985 Repair Manual page 264

FUEL SYSTEM - Carburetor
FU-21
FU0261
INSTALLATION OF CARBURETOR
1 . INSTALL CARBURETOR
(a) Place the insulator on the intake manifold.
(b) Install the carburetor.Tighten the bolts and nuts
securely.
2. CONNECT ACCELERATOR LINKAGE
Connect the linkage and install the clip.
3. CONNECT THROTTLE CABLE FOR AUTOMATIC
TRANSMISSION (See page AT -20)
4. CONNECT FOLLOWING HOSES TO CARBURETOR:
(a) Fuel inlet hose
(b) PCV hose
(c) Emission control hoses (see system layout in the emis-
sion control section or the layout printed under the
hood)
(d) Wiring connector