MT-44
\
\
\
MANUAL TRANSMISSION -
G 52 Transmission
GM0019
GM0020
GM0021
GM0023
GM0024
11. REMOVE SHIFT FORK SHAFT NO.4 AND SHIFT FORK
NO.3
(a)
Pull out shift fork shaft No.4 from the intermedi
plate.
CAUTION:
The locking balls and interlock pin will fall from
the holes so be sure to catch them by hand. If they do not
come out, remove them with a magnetic finger.
(b)
Remove shift fork shaft No.4 and shift fork No.3.
12. REMOVE REVERSE SHIFT HEAD AND SHIFT FORK SHAFT
NO.5
Pull out shift fork shaft No.5 from the intermediate plate,
and remove it with the reverse shift head.
13. REMOVE SHIFT FORK SHAFT NO.3
Pullout shift fork shaft No.3 from the intermediate plate.
CAUTION:
The interlock pins will fall from the hole so be
sure to catch them by hand. If they do not come out, re-
move them with a magnetic finger.
14. REMOVE SHIFT FORK SHAFT NO.1
Pullout shift fork shaft No.1 from the intermediate plate.
CAUTION:
The interlock pin will fall from the hole so be
sure to catch it by hand. If it does not come out, remove
it with a magnetic finger.