EM-32
ENGINE MECHANICAL -
Cylinder Head
18. FILL WITH COOLANT
Close the radiator and engine drain cocks and fill with
coolant.
Total capacity:
w/Heater 8.4 liters
(8.9
US
qts, 7.4 Imp. qts)
19. CONNECT CABLE TO NEGATIVE TERMINAL OF BATTERY
20. START ENGINE
Warm up the engine and inspect for leaks.
21. PERFORM ENGINE ADJUSTMENT
(a)
Retighten the cylinder head bolts.
(See step 3 on page EM-27)
(b)
Readjust the valve clearance.
(See page MA-13)
(c)
Recheck ignition timing. (See step 1 on page IG-10)
(d)
Adjust idle speed. (See step 14 on page MA-14)
22. RECHECK COOLANT AND ENGINE OIL LEVEL
23. ROAD TEST
Perform a road test.