Toyota 4-Runner 1985 Repair Manual page 68

ENGINE MECHANICAL - Cylinder Head
11 . INSTALL AIR CLEANER
(a) Install the air cleaner on the carburetor.
(b) Connect the air hoses and air duct.
12. FILL WITH ENGINE OIL
EM-39
Fill the engine with new oil, AP\
grade Sr:
or
Sr:JCC mu\\\-
grade, fuel efficient and recommended viscosity oil.
Capacity:
Dry fill 4.B liters
(5.1 US qts, 4.2 Imp. qts)
Drain and refill
w 10 Oil filter change 4.0 liters
(4.2 US qts, 3.5 Imp. qts)
wI
Oil filter change 4.6 liters
(4.9 US qts, 4.0 Imp. qts)
13. FILL WITH COOLANT
Close the radiator and engine drain cocks and
fill with
coolant.
Total capacity: w/Heater B.4 liters
(B.9 US qts, 7.4 Imp. qts)
14. CONNECT CABLE TO NEGATIVE TERMINAL OF BATTERY
15. START ENGINE
Warm up the engine and inspect for leaks.
16. PERFORM ENGINE ADJUSTMENT
(a) Retighten the cylinder head bolts.
(See step 3 on page EM-27)
(b) Readjust the valve clearance.
(See page MA-13)
(c) Recheck ignition timing. (See step 1 on page IG-10)
(d) Adjust idle speed. (See step 14 on page MA-14)
17. RECHECK COOLANT AND ENGINE OIL LEVEL
18. ROAD TEST
Perform a road test.