Toyota 4-Runner 1985 Repair Manual page 4

INTRODUCTION -
How to Use This Manual
IN-3
Photograph or illustration:
what to do and where
The procedures are presented in a step-by-step format:
• The photo or illustration shows what to do and where to do it.
• The task heading tells what to do.
• The detailed text tells how to perform the task and gives other
information such as specifications and warnings.
Example:
/ Task heading: what to do
INSTALL DRIVE SHAFT ON CENTER SUPPORT
BEARING FLANGE
(a) Align the marks on the flanges and connect the flanges with
four bolts and
nuts.~
(b) Torque the bolts and nuts. ________
Torque: 750 kg-em (54 ft-Ib, 74 N.m) Detail text:
~howtOdOit
Specification
This format enables the experienced technician to have a FAST
TRACK. He can read the task headings and only refer to the
detailed text when he needs it. Important specifications and
warnings always stand out in bold type.
REFERENCES
References have been kept to a minimum. However, when they
are required you are given the page to go to.
SPECIFICATIONS
Specifications are presented in bold type throughout the text
in the applicable step. You never have to leave the procedure
to look up your specs. All specifications are also found in Ap-
pendix A, specifications for quick reference.
WARNINGS, CAUTIONS, NOTES:
• WARNINGS are presented in bold type, and indicate there is
a possibility of injury to you or other pepole.
• CAUTIONS are also presented in bold type, and indicate the
possibility of damage to the components being repaired.
• NOTES are separated from the text but do not appear in bold.
They provide additional information to help you efficiently per-
form the repair.