Removing The Internal Delivery Roller - Canon GP605 Service Manual

CHAPTER 8 FIXING SYSTEM
5) Remove the E-ring [8], one-way gear [9],
and bearing [10]; then, remove the two E-
rings [11], and detach the two rollers [12].
Caution:
Each roller is equipped with a parallel
pin. Take care not to lose it.
2. Removing the Internal Delivery
Roller
1) Remove the fixing assembly from the
copier.
2) Remove the spring [2], three E-rings [3],
and bushing [4] at the front; then, detach
the drive gear [5].
8-44
COPYRIGHT © 1999 CANON INC.
[12]
[10]
Figure 8-F504
[1] [4]
Figure 8-F505
CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[11]
[12]
[11]
[9]
[2] [3] [5]
[8]
[3]