Internal Delivery Roller; Before Removing The Internal Delivery Roller; Removing The Internal Delivery Roller - Canon iR5055 Series Service Manual

Chapter 9
[4]

9.5.6 Internal Delivery Roller

9.5.6.1 Before Removing the Internal Delivery Roller

iR5065 / iR 5055 / iR5075 / iR5075N / iR5065N / iR5055N
1) Detach the duplexing feed front cover. (page 10-14)Reference[Remov-
ing the Duplexing Feed Front Cover]
2) Detach the fixing/feeding unit. (page 9-19)Reference[Removing the
Fixing/Feeding unit]
3) Detach the fixing front cover. (page 10-16)Reference[Removing the
Fixing Front Cover]
4) Detach the fixing/feeding unit front cover. (page 10-15)Reference[Re-
moving the Fixing/Feeding Unit Front Cover]
5) Detach the fixing/feeding unit middle cover. (page
ence[Removing the Fixing/Feeding Unit Middle Cover]
6) Detach the fixing upper cover. (page 10-15)Reference[Removing the
Fixing Upper Cover]
7) Remove the fixing drive assembly. (page 10-22)Reference[Removing
the Fixing Drive Assembly]
8) Remove the fixing upper unit. (page 9-20)Reference[Removing the Fix-
ing Upper Unit]
9) Remove the lower separation claw unit. (page 9-39)Reference[Remov-
ing the Lower Separation Claw (Unit)]

9.5.6.2 Removing the Internal Delivery Roller

iR5065 / iR 5055 / iR5075 / iR5075N / iR5065N / iR5055N
1) Slide the fixing heat discharge fan assembly [3] toward the outside.
- 3 connectors [1]
- 3 screws [2]
9-26
[8]
[7]
[6]
[9]
[5]
[3]
[2]
[1]
F-9-60
10-15)Refer-
2) Shift the gear [2].
- 1 E-ring [1]
0015-7187
3) Remove the gear [2].
- 1 E-ring [1]
0015-5053
The following steps 4) and 5) are performed at the rear side.
4) Remove 1 connector [3] found inside of the delivery motor [2].
- 4 screws [1]
Be careful not the bearing and the O-ring fallen off.
[3]
[1] [2] [3] [4]
F-9-61
[2] [1]
F-9-62
[2] [1]
F-9-63
[1]