Lldp Function Configuration Task Sequence - Planet XGS3-42000R User Manual

11.2 LLDP Function Configuration Task Sequence

1. Globally enable LLDP function
2. Configure the port-based LLDP function switch
3. Configure the operating state of port LLDP
4. Configure the intervals of LLDP updating messages
5. Configure the aging time multiplier of LLDP messages
6. Configure the sending delay of updating messages
7. Configure the intervals of sending Trap messages
8. Configure to enable the Trap function of the port
9. Configure the optional information-sending attribute of the port
10. Configure the size of space to store Remote Table of the port
11. Configure the type of operation when the Remote Table of the port is full
12. Display and debug the relative information of LLDP
1. Globally enable LLDP function
Global Mode
lldp enable
lldp disable
2. Configure the port-ba se LLDP function switch
Port Mode
lldp enable
lldp disable
3. Configure the operating state of port LLDP
Port Mode
lldp mode (send|receive|both|di sable)
4. Configure the intervals of LLDP updating message s
Global Mode
lldp tx-interval <integer>
no lldp tx-interval
5. Configure the aging time multiplier of LLDP message s
Global Mode
lldp msgTxHold <value>
no lldp msgTxHold
Command
Command
Command
Command
Command
Explanation
Globally enable or disable LLDP function.
Explanation
Configure the port-ba se LLDP function
switch.
Explanation
Configure the operating state of port
LLDP.
Explanation
Configure the intervals of LLDP updating
messages as the specified value or
default value.
Explanation
Configure the aging time multiplier of
LLDP messages as the specified value or
default value.
11-2