Planet XGS3-42000R User Manual page 309

IPv6 ospf retransmit <time>
[instance-id <id>]
no IPv6 ospf retransmit [instance-id
<id>]
（2）Configure OSPFv3 route introduction parameters
Configure OSPFv3 route introduction paramet ers
OSPF Protocol Mode
[no]redi stribute {kernel |connected|
static| rip| i si s| bgp} [metric<value>]
[metric-type {1|2}][route-map<word>]
（3）Configure OSPFv3 importing the routes of other OSPFv3 proce sse s
1）Enable the function of OSPFv3 importing the rout es of other OSPFv3 processes
Rout er IP v6 OSPF Mode
redistribute ospf [<process-id> ]
[metric<value> ] [metric-type
{1|2}][route-map<word>]
no redistribute ospf [<process-id> ]
[metric<value> ] [metric-type
{1|2}][route-map<word>]
2）Display relative information
Admin Mode or Configure Mode
show ipv6 ospf [<process-id> ]
redistribute
3）Debug
Admin Mode
Commands
Command
Command
Command
.Sets the interval for ret ransmission of link-state
advertisement among neighbor layer3 switches;
the "no IPv6 ospf retransmit [instance-id
<id>]" command restores the default setting.
Explanation
Introduces other protocol discovery routing
and static routing regarded as external
routing message. The [no] redistribute
{kernel |connected| static| rip| i si s| bgp}
[metric<value> ]
{1|2}][route-map<word>]
cancels imported external routing message.
Explanation
Enable or disable the function of OSPFv3
importing the rout es of ot her OSPFv3
processes.
Explanation
Display the configuration information of the
OSPFv3 process importing other outside
routes.
Explanation
38-6
[metric-type
command