Table of Contents
Advertisement
2. Configure proxy ARP
VLAN Port Mode
ip proxy-arp
no ip proxy-arp
3. Clear dynamic ARP
Admin mode
clear arp-cache
4. Select hash arithmetic
Global mode
l3 hashselect
[<crc16l |crc16u|crc32l |crc32u|l sb>]
5. Clear the statistic information of ARP message
Admin mode
clear arp traffic
Command
Command
Command
Command
Explanation
Enables the proxy ARP function for Ethernet
ports: the no command disables the proxy
ARP.
Explanation
The command clear arp-cache clears the
content of current ARP table, but it does not
clear the current static ARP table.
Explanation
Set the hash arit hmetic of the lay er 3 table.
This command refers to ARP table list storage
in the hardware, the implement need to guide
by the technique specialist.
information please refer to the interrelated
Command Guide.
Explanation
Clear
the
statistic
messages of the switch.
21-20
The
detail
information
of
ARP
Advertisement
Table of Contents
Troubleshooting
