Planet XGS3-42000R User Manual page 90

 FTP Configuration
PC side:
Start the FTP server soft ware on the PC and set the username "Switch", and the password "A dmin".
Switch:
XGS 3-42000R(config)#interface vlan 1
XGS 3-42000R(config-if-Vlan1)#ip address 10.1.1.2 255.255.255.0
XGS 3-42000R(config-if-Vlan1)#no shut
XGS 3-42000R(config-if-Vlan1)#exit
XGS 3-42000R#copy ftp: //Switch: superuser@10.1.1.1
220 Serv-U FTP -Server v2.5 build 6 for WinSock ready...
331 User name okay, need password.
230 User logged in, proceed.
200 PORT Command successful.
150 Opening AS CII mode data connection for /bin/ls.
rec v total = 480
nos.img
nos.rom
parsecommandline.cpp
position.doc
qmdict.zip
...(some display omitted here)
show.txt
snmp.TXT
226 Transfer complete.
4.5.3.4 FTP/TFTP Troubleshooting
4.5.3.4.1 FTP Troubleshooting
When upload/download system file with FTP prot ocol, the connectivity of the link must be ensured, i.e.,
use the "Ping" command to verify the c onnectivity between t he FTP client and server before running t he FTP
program. If ping fails, you will need to check for appropriate troubles hooting information to recover the link
connectivity.
 The following is what the message displays when files are s uccessfully trans ferred. Otherwise, please
verify link connectivity and retry "copy" command again.
220 Serv-U FTP -Server v2.5 build 6 for WinSock ready...
331 User name okay, need password.
230 User logged in, proceed.
200 PORT Command successful.
nos.img file lengt h = 1526021
read file ok
send file
4-22