Table of Contents
Advertisement
（2）Configure RIP route parameters
1） Configure route introduction (default route metric, configure routes of the other protocols to be introduced in
RIP )
Rout er Configuration Mode
default-metric <value>
no default-metric
redistribute {kernel |connected| static|
ospf | i si s| bgp} [metric< value> ]
[route-map<word> ]
no redistribute {kernel |connected|
static| ospf | i si s| bgp} [metric< value>]
[route-map<word> ]
default-information originate
no default-information originate
2）Configure interface authentication mode and password
Interface configuration mode
ip rip authentication mode { text| md5}
no ip rip authentication mode [text|
md5]
ip rip authentication string <text>
no ip rip authentication string
ip rip authentication key-chain
<name-of-chain>
no ip rip authentication key-chain
[<name-of-chain>]
ip rip authentication cisco-compatible
no ip rip authentication
ci sco-compatible
Global mode
key chain <name-of-chain>
no key chain < name-of-chain >
Command
Command
Explanation
Sets the default route metric for route to be
introduced; the "no default-metric" command
restores the default setting.
Redistribute the routes distributed in other
routing protocols into the RIP data packet; the
no redistribute {kernel |connected| static|
ospf
|
i si s|
[route-map<word>]
distributed route of corresponding protocols.
Generat e a default route to the RIP prot ocol; the
no default-information originate command
cancels the feature.
Explanation
Sets the authentication method; the no ip rip
authentication mode [text| md5] command
cancels the authentication action.
Sets the authentication key; the no ip rip
authentication string command means no key
is needed.
Sets the key chain used in authentication, the no
ip
rip
authentication
[<name-of-chain>] command means the key
chain is not used.
After configure this command, configure MD5
authentication, then can receive RIP packet of
cisco, the no command resores the defaule
configuration.
Enter keychain mode, and configure a key
chain, the no key chain < name-of-chain >
command delet es the key chain.
35-4
bgp}
[metric<value>]
command
cancels
key-chain
the
Advertisement
Table of Contents
Troubleshooting
