DHCP v6
(15) Set the flag representing whether the address information will be obtained via DHCP v6
3. IP v6 Tunnel configuration
(1) Create/Delete Tunnel
(2) Configure tunnel description
(3) Configure Tunnel Sourc e
(4) Configure Tunnel Destination
(5) Configure Tunnel Next-Hop
(6) Configure Tunnel Mode
(7) Configure Tunnel Routing
1. IPv6 Basi c Configuration
(1) Globally enable IP v6
Command
Global mode
ipv6 enable
no ipv6 enable
(2) Configure interface IP v6 address
Command
Interface Configuration Mode
ipv6 address
<ipv6-address/prefix-length>
[eui-64]
no ipv6 address
<ipv6-address/prefix-length>
(3) Set IP v6 Static Routing
Command
Global mode
Explanation
Enable functions such as IP v6 data packet
transmission,
neighbor
advertisement, routing protocol, etc. The NO
command disables IP v6 function.
Explanation
Configure IP v6 address, including aggregatable
global unicast addresses, site-local addresses
and link-local addresses. The no ipv6 address
<ipv6-address/prefix-length>
cancels IP v6 address.
Explanation
21-5
discovery,
router
command