Acl Example - Planet XGS3-42000R User Manual

（3）Configure absolute time range
Global Mode
absolute start < start_time> < start_data> [end
<end_time> <end_data>]
[no] absolute start < start_time> < start_data> [end
<end_time> <end_data>]
4. Bind access-li st to a specific direction of the specified port.
Physical Port Mode, VLAN Port Mode
{ip|ipv6|mac|mac-ip} acce ss-group <acl-nam e>
{in}[traffic-stati stic]
no {ip|ipv6|mac|mac-ip} acce ss-group <acl-nam e>
{in}
5. Clear the filtering information of the specified port
Admin Mode
clear access-group stati stic
{ <interface-name> | ethernet <interface-name> }

46.3 ACL Example

Scenario 1:
The user has the following configuration requirement: port 1/10 of the switch connects to 10.0.0.0/24 segment,
ftp is not desired for the user.
Configuration description:
1． Create a proper A CL
2． Configuring packet filtering function
3． Bind the ACL to the port
Command
Command
Command
interface
46-16
Explanation
Configure absolute
range.
Stop the function of the time
range.
Explanation
Physical interface
Applies an access-list to the
specified direction on the
port; the no command
deletes the access-list
bound to the port.
VLAN interface
Applies an access-list to the
specified direction on the
port of V LAN; the
command deletes
access-list bound to the port
of VLA N.
Explanation
Clear the filtering information
of the specified port.
time
mode:
mode:
no
the