Planet XGS3-42000R User Manual page 387

2. Enable DVMRP Protocol on the interface
The basic configuration to function DVMRP routing protocol on XGS3 series Layer 3 switch is very simple.
After globally enabling DVMRP Protocol, it is required to t urn on DVMRP switch under corresponding
interface.
Interface Configuration Mode
ip dvmrp
no ip dvmrp
3. Configure DVMRP Sub-parameters
（1）Configure DVMRP Int erface Parameters
1) Configure the delay of transmitting report message on DVMRP interface and the message number
each time it transmits
2) Configure metric value of DVMRP interface
3) Configure if DVMRP is able to set up neighbors with DVMRP routers which can not Prune/Graft
Command Explanation
Enable DVMRP Protocol on the interface, the
"no ip dvmrp" command disables DVMRP
Protocol on the interface.
43-35