Planet XGS3-42000R User Manual page 170

no set {ip dscp <new-dscp> | ip precedence
<new-precedence> | ipv6 dscp <new-dscp> |
ipv6 flowlabel <new-flowlabel> | ip nexthop
<ip-address> | cos }
policy <bits_per_second>
<normal_burst_bytes> ({conform-action
(drop | set-dscp-transmit <dscp_value> |
set-prec-transmit <ip_precedence_value> |
transmit) | exceed-action (drop |
policed-dscp-transmit | transmit) } | )
no policy <bits_per_second>
<normal_burst_bytes> ({conform-action
(drop | set-dscp-transmit <dscp_value> |
set-prec-transmit <ip_precedence_value> |
transmit) | exceed-action (drop |
policed-dscp-transmit | transmit)} | )
policy <bits_per_second>
<normal_burst_byte s> (pir <peak_rate_bps>
| ) <maximum_burst_byte s>
({conform-action (drop | set-dscp-transmit
<dscp_value> | set-prec-transmit
<ip_precedence_value> | transmit)
exceed-action (drop | policed-dscp-transmit |
transmit) | violate-action (drop |
policed-dscp-transmit | transmit)} | )
no policy <bits_per_second>
<normal_burst_byte s> (pir <peak_rate_bps>
| ) <maximum_burst_byte s>
({conform-action (drop | set-dscp-transmit
<dscp_value> | set-prec-transmit
<ip_precedence_value> | transmit)
exceed-action (drop | policed-dscp-transmit |
transmit) | violate-action (drop |
policed-dscp-transmit | transmit)} | )
mls qos aggregate-policy <policer_name>
<bits_per_second> <normal_burst_bytes>
({conform-action (drop | set-dscp-transmit
<dscp_value> | set-prec-transmit
<ip_precedence_value> | transmit) |
exceed-action (drop | policed-dscp-transmit |
transmit) } | )
mls qos aggregate-policy <policer_name>
<bits_per_second><normal_burst_bytes>(pi
r <peak_rate_bps>|)
<maximum_burst_byte s> ({conform-action
(drop | set-dscp-transmit <dscp_value>
The non-aggregation policer command
supporting three
whet her the working mode of token
bucket is singe rage single bucket,
single rate single bucket, single rate
dual bucket or dual rate dual bucket, by
analyzing the
command will
configuration.
Analyze the working mode of the token
bucket, whether it is single rate singe
bucket, singe rate dual bucket or dual
rate dual bucket. This policy can be
used by more than one policy class in
one policy map. The no operation will
delete the mode configuration.
17-7
colors. Determine
parameters. The no
delet e the
mode