Configuration Modes - Planet XGS3-42000R User Manual

3.2.1 Configuration Modes

Figure 3-1-12 Shell Configuration Modes
3.2.1.1 User Mode
On entering the CLI interface, ent ering user ent ry system first. If as common user, it is defaulted to User Mode.
The prompt shown is "XGS3-42000R> ", the symbol ">" is the prompt for User Mode. When exit command is
run under Admin Mode, it will also return to the Us er Mode.
Under User Mode, no configuration to the Chassis Switch is allowed, only clock time and version information
of the Chassis Switch can be queries.
3.2.1.2 Admin Mode
To A dmin Mode sees the following: In user entry system, if as Admin user, it is defaulted to Admin Mode.
Admin Mode prompt "X GS3-42000R#" can be entered under the User Mode by running the enable command
and entering corresponding access levels admin user password, if a password has been set. Or, when exit
command is run under Global Mode, it will also return to the Admin Mode. Chassis Switch also provides a
shortcut key sequence " Ctrl+z", this allows an easy way to exit to Admin Mode from any configuration mode
(except User Mode).
Under Admin Mode, the user can query the Chassis Switch configuration information, connection status and
traffic statistics of all ports; and the user can further enter the Global Mode from Admin Mode to modify all
configurations of the Chasssis Switch. For this reason, a password must be set for entering Admin mode to
prevent unauthorized access and malicious modification to the Chassis Switch.
3-34