Planet XGS3-42000R User Manual page 281

3. Configure other RIPng protocol parameters
(1) Configure timer for RIPng update, timeout and hold-down
Rout er configuration mode
timers ba sic <update> <invalid>
<garbage>
no timers ba sic
4. Delete the specified route in RIPng route table
Admin Mode
clear IPv6 rip route
{<IPv6-address> |kernel|static|conn
ected|rip|ospf|i si s|bgp|all}
5. Configure RIPng route aggregation
(1) Configure IPv6 aggregation route globally
Rout er Configuration Mode
ipv6 rip aggregate-address
X:X::X:X/M
no ipv6 rip aggregate-address
X:X::X:X/M
(2) Configure IPv6 aggregation route on interface
Interface Configuration Mode
ipv6 rip aggregate-address
X:X::X:X/M
no ipv6 rip aggregate-address
X:X::X:X/M
(3) Di splay IPv6 aggregation route information
Admin Mode and Configuration Mode
show ipv6 rip aggregate
6. Configure redistribution of OSPFv3 routing to RIPng
(1)Enable redistribution of OSPFv3 routing to RIPng
Command
Command
Command
Command
Command
Explanation
Adjust the renew, timeout and garbage recycle
RIP ng timer, the no timers basic command
restore the default configuration.
Explanation
the command deletes a specified route from the
RIP route table.
Explanation
To configure or delet e IP v6 aggregation rout e
globally.
Explanation
To configure or delet e IP v6 aggregation rout e
on interface.
Explanation
To display IP v6 aggregation route information,
such as aggregation interface, metric, numbers
of aggregation route, times of aggregation.
36-5