Planet XGS3-42000R User Manual page 153

2. Lock the MAC addresse s for a port
Port Mode
switchport port-security lock
no switchport port-security lock
switchport port-security convert
switchport port-security timeout <value>
no switchport port-security timeout
switchport port-security mac-address
<mac-address>
no switchport port-security
mac-address <mac-address>
Admin Mode
clear port-security dynamic [address
<mac-addr> | interface <interface-id>]
3. MAC addre ss binding property configuration
Port Mode
switchport port-security maximum
<value>
no switchport port-security maximum
<value>
switchport port-security violation
{protect | shutdown}
no switchport port-security violation
15.5.1.3 Binding MAC Address Binding Troubleshooting
Enabling MA C address binding for ports may fail in some occasions. Here are some possible causes and
solutions:
Command
Command
Explanation
Lock the port, then MA C addresses
learned will be disabled. The "no
switchport port-security lock" command
restores the function.
Convert dynamic secure MAC addresses
learned by the port to static secure MAC
addresses.
Enable port locking timer function; the "no
switchport port-security timeout"
restores the default setting.
Add static secure MAC address; the "no
switchport port-security mac-address"
command delet es static secure MAC
address.
Clear dynamic MAC addresses learned by
the specified port.
Explanation
Set the maximum number of secure MA C
addresses for a port; the "no switchport
port-se curity maximum" command
restores the default value.
Set the violation mode for the port; the "no
switchport port-security violation"
command restores the default setting.
15-6