Ulsm Configuration Task List; Ulsm Typical Example - Planet XGS3-42000R User Manual

62.2 ULSM Configuration Task List

1. Create ULSM group globally
2. Configure ULSM group
3. Show and debug the relating information of ULSM
1. Create ULSM group globally
Global mode
ulsm group <group-id>
no ulsm group <group-id>
2. Configure ULSM group
Port mode
ulsm group <group-id> {uplink |
downlink}
no ulsm group <group-id> {uplink |
downlink}
3. Show and debug the relating information of ULSM
Admin mode
show ulsm group [group-id]
debug ulsm event
no debug ulsm event

62.3 ULSM Typical Example

Command
Command
Command
SwitchD
E1/3
SwitchB E1/1
E1/1
Figure 62-3-1 ULSM typical example
explanation
Configure and delete ULSM group globally.
explanation
Configure the uplink/downlink
ULSM group, the no command deletes the
uplink/downlink port.
Explanation
Show the configuration information of
ULSM group.
Show the event information of ULSM, the
no operation
information.
E1/4
E1/2 SwitchC
E1/2
SwitchA
62-2
port
disables the shown
of