Planet XGS3-42000R User Manual page 194

21.2.3.2 Configuration Examples of IPv6
Example 1:
The user's configuration requirements are: Configure IP v6 address of different net work segments on S witch1
and Switch2, configure static routing and validate reachability using ping6 function.
Configuration De scription:
1． Configure two VLA Ns on Switch1, namely, VLAN1 and VLAN2.
2． Configure IP v6 address 2001::1/64 in VLAN1 of Switch1, and configure IP v6 address 2002::1/64 in
VLAN2.
3． Configure 2 VLA Ns on Switch2, namely, VLAN2 and VLA N3.
4． Configure IP v6 address 2002::2/64 in VLAN2 of Switch2, and configure IP v6 address 2003::1/64 in
VLAN3.
5． The IP v6 address of P C1 is 2001::11/64, and the IP v6 address of PC2 is 2003::33/64.
6． Configure static routing 2003:33/64 on Switch1, and configure static routing 2001::11/ 64 on Switch2.
7． ping6 each ot her among PCs.
First make sure PC1 and Switch1 can access each other by ping, and PC2 and
Switch2 can access each other by ping.
The configuration procedure is a s follow s:
Switch1(Config)#ipv6 enable
Switch1(Config)#interface vlan 1
Switch1(Config-if-Vlan1)#ipv6 address 2001::1/64
Switch1(Config)#interface vlan 2
Switch1(Config-if-Vlan2)#ipv6 address 2002::1/64
Switch1(Config-if-Vlan2)#exit
Switch1(Config)#ipv6 route 2003::33/64 2002::2
Switch2(Config)#ipv6 enable
Switch2(Config)#interface vlan 2
Switch2(Config-if-Vlan2)#ipv6 address 2002::2/64
PC1
Switch1
Figure 21-2-2 IP v6 configuration example
21-12
Switch2
PC2