Planet XGS3-42000R User Manual page 318

router bgp <as-id>
no router bgp <as-id>
Rout er configuration mode
network <ip-address/M>
no network <ip-address/M>
2. Configure BGP Neighbors
Rout er configuration mode
neighbor {<ip-address> |<TAG>}
remote-as <as-id>
no neighbor {<ip-address> |<TAG>}
[remote-as <as-id>]
3. Administrate the change of routing policy
（1）Configure hard reconfiguration.
Admin Mode
clear ip bgp {<*>|<as-id> |
external|peer-group
<NAME>|<ip-address>}
（2） Configure outbound soft reconfiguration.
Admin Mode
clear ip bgp {<*>|<as-id> |
external|peer-group
<NAME> |<ip-address>} soft out
（3）Configure inbound soft reconfiguration.
BGP configuration mode
neighbor { <ip-address> | <TAG> }
soft-reconfiguration inbound
no neighbor { <ip-address> | <TAG> }
soft-reconfiguration inbound
Admin Mode
clear ip bgp {<*>|<as-id> | external|peer-group
<NAME>|<ip-address>} soft in
Command
Command
Command
Command
Enable BGP, the
<as-id>"command disenable BGP process.
Set the network that BGP will announc e, the no
network <ip-address/M> command cancels the
network that will be announced.
Explanation
Specify a BGP neighbor, the no neighbor
{<ip-address> |<TAG>}
<as-id>] command deletes the neighbor.
Explanation
Configure hard reconfiguration.
Explanation
Configure out bound soft reconfiguration.
This command can store routing
information from neighbors and
peers;
{ <ip-address>
soft-reconfiguration
command cancels the storage of
routing information.
Configure
reconfiguration.
39-5
"no router
[remote-a s
Explanation
the no neighbor
| <TAG>
inbound
BGP inbound soft
bgp
}