System Log Configuration Example - Planet XGS3-42000R User Manual

66.7.3 System Log Configuration Example

Example 1: When managing VLA N the IP v4 address of the switch is 100.100.100.1, and the IP v4 address of
the remote log server is 100.100.100.5. It is required to send the log information with a severity equal to or
higher than warnings to this log server and save in the log record equipment local1.
Configuration procedure:
XGS 3-42000R(config)#interface vlan 1
XGS 3-42000R(config-if-Vlan1)# ip address 100.100.100. 1 255.255.255. 0
XGS 3-42000R(config-if-Vlan1)#exit
XGS 3-42000R(config)#logging 100.100.100.5 facility local1 level warnings
Example 2: When managing V LAN the IP v6 address of the switch is 3ffe:506::1, and the IP v4 address of the
remot e log server is 3ffe:506::4. It is required to send the log information with a severity equal to or higher
than critical to this log server and save the log in the record equipment local7.
Configuration procedure
XGS 3-42000R(config)#interface vlan 1
XGS 3-42000R(config-if-Vlan1)#ipv6 address 3ffe:506::1/64
XGS 3-42000R(config-if-Vlan1)#exit
XGS 3-42000R(config)#logging 3ffe: 506::4 facility local7 level critical
66-6