Ip Configuration Examples - Planet XGS3-42000R User Manual

(6) Configure Tunnel Mode
Command
Tunnel Configuration Mode
tunnel mode ipv6ip [6to4 | isatap]
no tunnel mode ipv6ip [6to4 |
isatap]
(7) Configure Tunnel Routing
Command
Global mode
ipv6 route
<ipv6-addre ss/prefix-length>
{<interface-type interface-number>
| tunnel <tnl-id>}
no ipv6 route
<ipv6-addre ss/prefix-length>
{<interface-type interface-number>
| tunnel <tnl-id>}

21.2.3 IP Configuration Examples

21.2.3.1 Configuration Examples of IPv4
The user's configuration requirements are: Configure IP address of different network segments on S witch1
and Switch2, configure static routing and validate accessibility using ping function.
Configuration De scription:
1． Configure two VLA Ns on Switch1, namely, VLAN1 and VLAN2.
2． Configure IP v4 address 192. 168. 1.1 255.255.255.0 in VLAN1 of Switch1, and configure IP v4
address 192. 168. 2.1 255.255.255.0 in VLAN2.
3． Configure two VLA Ns on Switch2, respectively VLAN2 and VLA N3.
Configure tunnel mode. The NO command
clears tunnel mode.
Configure tunnel routing. The NO command
clears tunnel routing.
PC1
Switch1
Figure 21-2-1 IP v4 configuration example
21-10
Explanation
Explanation
Switch2
PC2