Planet XGS3-42000R User Manual page 521

1. Configure RSPAN VLAN
VLAN Configuration Mode
remote-span
no remote-span
2. Configure mirror source port (CPU)
Global Mode
monitor se ssion < session> source
{interface <interface-li st> | cpu [slot
<slotnum>]} {rx| tx | both}
no monitor se ssion < session> source
{interface <interface-li st> | cpu [slot
<slotnum>]}
3. Configure mirror de stination port
Global Mode
monitor se ssion < session> de stination
interface <interface-number>
no monitor se ssion < session> de stination
interface <interface-number>
4. Configure reflector port
Global Mode
monitor se ssion < se ssion> reflector-port
<interface-number>
no monitor se ssion < se ssion> reflector-port
5. Configure remote VLAN of mirror group
Command
Global Mode
monitor se ssion < session>
remote vlan <vid>
no monitor se ssion <. session> remote vlan
Command
Command
Command
Command
Explanation
To configure the specified VLAN as
RSPAN VLAN. The no command will
remove the configuration of RSPA N
VLAN.
Explanation
To configure mirror source port; The no
command delet es the mirror source port.
Explanation
To configure mirror destination interface;
The no command deletes the mirror
destination port.
Explanation
To configure the interfac e to reflector
port; The no command deletes the
reflector port.
Explanation
To configure remote V LAN of mirror
group, the no command deletes the
remot e VLAN of mirror group.
56-3