Planet XGS3-42000R User Manual page 527

2. Configure the sFlow proxy address
Global Mode
sflow agent-address <collector-address>
no sflow agent-address
3. Configure the sFlow proxy priority
Global Mode
sflow priority <priority-vlaue>
no sflow priority
4. Configure the packet head length copied by sFlow
Port Mode
sflow header-len <length-vlaue>
no sflow header-len
5. Configure the max data head length of the sFlow packet
Port Mode
sflow data-len <length-vlaue>
no sflow data-len
6. Configure the sampling rate value
Port Mode
sflow rate {input <input-rate> | output
<output-rate >}
no sflow rate [input | output]
7. Configure the sFlow stati stic sampling interval
Port Mode
sflow counter-interval <interval-vl aue>
no sflow counter-interval
Command
Command
Command
Command
Command
Command
Explanation
Configure the sourc e IP address applied by
the sFlow proxy; the "no" form of the
command delet es this address.
Explanation
Configure the priority when sFlow receives
packet from the hardware; the "no sflow
priority" command restores to the default
Explanation
Configure the length of the packet data head
copied in the sFlow data sampling; the "no"
form of this command restores to the default
value.
Explanation
Configure the max length of the data packet in
sFlow; the "no" form of this command restores
to the default.
Explanation
Configure the sampling rate when sFlow
performing hardware sampling. The "no"
command delet es the rate value.
Explanation
Configure the max interval when sFlow
performing statistic sampling. The "no" form of
this command deletes
57-2