Planet XGS3-42000R User Manual page 280

[no]redi stribute {kernel |connected|
static| ospf| i si s| bgp}
[metric<value> ] [route-map<word>]
[no]default-information originate
2）Configure the route offset
Rout er configuration mode
[no] offset-list <acce ss-li st-number
|acce ss-li st-name> {in|out}
<number > [<ifname>]
3）Configure and apply route filter and route aggregation
Rout er configuration mode
[no] di stribute-li st
{<access-li st-number
|access-li st-name> |
prefix<prefix-li st-name>} {in|out}
[<ifname>]
[no]aggregate-address
<IPv6-address>
4）Configure split horizon
Interface configuration mode
IPv6 rip split-horizon [poi soned]
no IPv6 rip split-horizon
Command
Command
Command
Redistribute the routes distributed in other route
protocols into the RIP ng data packet; the
[no]redi stribute {kernel |connected| static|
ospf| isi s| bgp}
[route-map<word> ]
distributed route of corresponding protocols.
Generat e a default route to the RIPng protocol;
the [no] default-information
command cancels the feature.
Explanation
Configure that provide a deviation value to the
route met ric value when the port sends or
receives RIP ng data packet; the [no] offset-li st
<access-li st-number
{in|out} <number > [<ifname>] command
removes the deviation table.
Explanation
Set to filter the route when the interface sends
and rec eives RIPng data packets. The [no]
distribute-li st {<
|access-li st-name
prefix<prefix-li st-name>} {in|out} [<ifname>]
command means do not set the route filter.
Configure route
aggregate-address < IPv6-address command
cancels the rout e aggregation.
Explanation
Configure that take the split-horizon when the
port sends data packets, poisoned means with
poison reverse.
Canc el the split-horizon.
36-4
[metric<value>]
command cancels
originate
|access-li st-name>
access-li st-number
>
aggregation, the
the
|
[no]