Planet XGS3-42000R User Manual page 259

match interface <interface-name >
no match interface [<interface-name >]
match ip <address | next-hop> <ip-acl -name | ip-acl-num
| prefix-list li st-nam e>
no match ip <address | next-hop> [<ip-acl-name |
ip-acl-num | prefix-list [li st-name]> ]
match metric <metric-val >
no match metric [<metric-val >]
match origin <egp | igp | incomplete >
no match origin [<egp | igp | incomplete >]
match route-type external <type-1 | type-2 >
no match route-type external [<type-1 | type-2 >]
match tag <tag-val >
no match tag [<tag-val >]
3. Define the set clause in route-map
Rout e-map configuration mode
set aggregator as <as-number> <ip_addr>
no set aggregator as [ <as-number> <ip_addr> ]
set a s-path prepend <as-num>
no set a s-path prepend [ <as-num> ]
Command
Match by ports; The no
match interface
[<interface-name >]
command delet es match
condition.
Match the address or
next-hop; The no match
ip <address | next-hop>
[<ip-acl -name |
ip-acl-num | prefix-list
[list-name]> ] command
deletes match condition.
Match the routing metric
value; The no match
metric [<metric-val >]
command delet es match
condition.
Match the route origin;
The no match origin
[<egp | igp |
incomplete >] command
deletes match condition.
Match the route type; The
no match route-type
external [<type-1 |
type-2 >] command
deletes match condition.
Match the route tag; The
no match tag
[<tag-val >] command
deletes match condition.
Explanation
Distribute an AS No. for
BGP aggregator; The no
command
configuration
Add a s pecified AS No.
before the BGP routing
messages
series; The no c ommand
deletes the configuration
33-5
deletes the
as-path