43.4.3.2 Enabling MSDP
MSDP should be enabled before various MSDP functions can be configured.
1.
Enable the MSDP function
2.
Configure MSDP
1. Enabling MSDP
Global Configuration Mode
router m sdp
no router m sdp
2. Configuration of MSDP parameters
MSDP Configuration Mode
connect-source <interface-type>
<interface-number>
no connect-source
default-rpf-peer <peer-address> [ rp-policy
<acl-li st-number> | <word> ]
no default-rpf-peer
originating-rp <interface-type>
<interface-number>
no originating-rp
ttl-thre shold <ttl>
no ttl-thre shold
43.4.4 Configuration of MSDP Entities
43.4.4.1 Creation of MSDP Peer
MSDP Configuration Mode
peer <peer-address>
no peer <peer-address>
Commands
Commands
Commands
Explanation
To enable MSDP. The no form of this
command will disable MSDP globally.
Explanation
To configure the Connect-Source interface for
MSDP Peer. The no form of this command
will remove the configured Connect-Source
interface.
To configure static RPF Peer. The no form of
this command will remove the configured
RPF Peer.
To configure Originator-RP. The no form of
this command will remove the configured
Originator-RP.
To configure the TTL value. The no form of
this command will remove the configured TTL
value.
Explanation
To create a MSDP Peer. The no form of this
command will remove the configured MSDP
Peer.
43-17