Planet XGS3-42000R User Manual page 132

Connect the Trunk ports of both switches for a Trunk link to convey the cross-switch VLA N traffic; connect all
network devices to the other ports of corresponding VLA Ns.
In this example, port 1 and port 12 is spared and can be used for management port or for other purposes.
The configuration steps are listed below:
Switch A:
XGS 3-42000R(config)#vlan 2
XGS 3-42000R(config-Vlan2)#s witchport interface ethernet 1/2-4
XGS 3-42000R(config-Vlan2)#exit
XGS 3-42000R(config)#vlan 100
XGS 3-42000R(config-Vlan100)#switchport interface ethernet 1/5-7
XGS 3-42000R(config-Vlan100)#exit
XGS 3-42000R(config)#vlan 200
XGS 3-42000R(config-Vlan200)#switchport interface ethernet 1/8-10
XGS 3-42000R(config-Vlan200)#exit
XGS 3-42000R(config)#interface ethernet 1/11
XGS 3-42000R(config-If-Ethernet1/11)#s witchport mode trunk
XGS 3-42000R(config-If-Ethernet1/11)#exit
XGS 3-42000R(config)#
Switch B:
XGS 3-42000R(config)#vlan 2
XGS 3-42000R(config-Vlan2)#s witchport interface ethernet 1/2-4
XGS 3-42000R(config-Vlan2)#exit
XGS 3-42000R(config)#vlan 100
XGS 3-42000R(config-Vlan100)#switchport interface ethernet 1/5-7
XGS 3-42000R(config-Vlan100)#exit
XGS 3-42000R(config)#vlan 200
XGS 3-42000R(config-Vlan200)#switchport interface ethernet 1/8-10
XGS 3-42000R(config-Vlan200)#exit
XGS 3-42000R(config)#interface ethernet 1/11
XGS 3-42000R(config-If-Ethernet1/11)#s witchport mode trunk
XGS 3-42000R(config-If-Ethernet1/11)#exit
14-5